Its all out of polar fleece, lining as well as the outer fabric. I found the fabric amounts on the envelope pretty accurate, I had some left over but not much.
Buttons are from my stash
I had a few issues with the instructions
- The hood is appliqued. I haven't done any applique before and I found the instructions pretty lacking to be honest. This is the second hood I made, the first rippled badly. So my tips if you haven't done applique before on polar fleece is to interface under where you'll be doing it (it made a huge difference), reduce your foot pressure slightly (I went to 2 from 3) and to not do too tight of a satin stitch. I first did it with a .5 width and it was too tight so I backed it off to a .7 (this is on a Janome 6030 if that helps). Practice on a scrap first to get some idea of what your machine needs.
- Also because the polar fleece is so fluffy I found after I cut out the appliques if you pull off any loose fluff and trim the fluff at the edges it doesn't stick out from the satin stitch and look all messy.
- Applique so the stitch wraps over the edge of the fabric, if you go too far into the fabric there is a lip of fleece that sticks out and looks all messy.
- Before fusing the webbing on the appliques it helps to mark on the webbing paper what colour they are for (just makes it faster when you are at the ironing board)
- The inner black dot is a button. I didn't realise that until after I had tried to sew a black circle in satin stitch......a good thing about the polar fleece is you can unpick a lot and not see stitch marks, lol. Its written into the instructions after you have appliqued the hood and sewn it onto the main body.
- I would recommend you interface the back of the ears too, I didn't and found them a bit floppy now.
- The ear instruction just tells you to 'sew them onto the hood'. I decided to hand sew them on so they would sit up nice and straight and found it best to slip stitch around the back and the front of both ears.
- Because of the thickness of the polar fleece I had to cut the hood lining down to get it to sit smooth. I actually sewed it all up but it looked too baggy and terrible so I unpicked it and pinned in inside and trimmed what hung out and then when I resewed it, it fit in beautifully.
- I found the button markings to be off centre and not high enough (the pattern actually recommend to sew snaps inside the button band at the top and bottom but I didn't want to do that on a kids jacket) so I respaced the buttons and made them in the centre of the band.
- The instructions have you hand sew a lot (all the hems and at the front where the button band goes) so instead I bagged out the lining, leaving at gap at the bottom back hem to turn it out with and the top stitched that shut. So if you do that it helps to know that the hem on the jacket is 2" (for the life of me I couldn't find it marked anywhere on the pattern).
The eyes are a little wonky, I went over the green inner eye twice to try and even them up but I don't think its too noticeable?
I'll be making these as a standard birthday present for little kids from now on (the jacket only uses 1m fleece for the lining and 1 for the outer so if you pick it up on sale its quite a reasonable/cheap sewn gift). I have visions of purple or pink owl jackets for girls and maybe a blue version of this raccoon one.